• Facebook-logo314-664-2230
  •   

Fusion CS Spray Gun

Fusion CS Gun

Fusion CS Gun

Product Detail:

  • Air-blast tip cleaning reduces build-up and tip clogging
  • Hardened stainless steel mix chambers
  • Longer life side seals reduce maintenance and let you spray a wider       range of materials – choose from hardened stainless steel or
          Polycarbally options
  • Advanced mix module and tip design improves mixing
  • Solvent-resistant components and O-rings let you soak the whole gun       without swelling or damage
  • Daily maintenance in a matter of seconds with the quick-shot grease port

Specifications

  • Materials sprayed: Foam & coatings
  • Maximum output: 50 lb/min (22.7 kg/min)
  • Minimum output: 3 lb/min (1.4 kg/min
  • Maximum fluid working pressure: 3500psi (240 bar, 24.0 MPa)
  • Maximum working air inlet pressure: 130psi (9 bar, 0.9 MPa)
  • Maximum fluid temperature: 200 degrees F (93 degreesC)
  • Weight (with manifold): 3.1 lb (1.4 kg)
  • Air inlet size: 1/4 npt quick disconnect nipple
  • A Component (ISO) inlet size: -5 JIC, 1/2-20 UNF swivel
  • B Component (Resin) inlet size: -6 JICm 9/16-18 UNF swivel
  • Wetted parts: Aluminum, stainless steel, plated carbonsteel, brass,       chemically resistant
  • Gun Dimensions: 7.5 x 8.1 x 3.3 in. (19 x 20.6 x 8.4 cm)

Downloads:

Fusion CS Brochure | Fusion CS Manual

Comments are closed.