Graco E-10

Reactor E-10 Foam / Coatings

The E-10 is a small, ready-to-use system that helps you get in and get smaller jobs done fast and without sacrificing performance. The Reactor E-10 sprayers are ideal for plural-component spray, joint-fill jobs and touch-ups. You can switch from cold spray to hot spray foam. You can spray Polyurea and Polyurethane coatings, foam and can be used for caulking joints and spalls.

Specifications

• Maximum working pressure: 2000 psi (138 bar, 13.8 MPa)
• Maximum hose length: 105 feet (33m)
• Maximum output: 12 lb/min (5.4 kg/min)
• Heater power: 120v models: 850W each; 1700W total / 230v models: 1000W each; 2000W total
• Tank capacity: 7 gallons (26.5 liters) each (normal)
• Weight: Heated: 160 lbs. (72 kg) / Unheated: 150 lbs. (68 kg)

Air Consumption:

• Unheated joint fill units: 2 cfm @ 100psi (70 bar, 7 MPa)
• Unheated cold spray units: 16 cfm @ 100psi (70 bar, 7 MPa)
• Heated units with Fusion gun: 2.5 cfm @ 100psi (70 bar, 7MPa)