GRACO E-10

Graco Reactor E-10

Reactor E-10
Electric Foam and Polyurea Proportioner

For smaller polyurethane foam or polyurea projects or touch-ups - applies up to 12 lb (5.4 kg) per minute.

The E-10 is a small, ready-to-use system that helps you get in and get smaller jobs done fast and without sacrificing performance. The Reactor E-10hp sprayers are ideal for plural-component spray, joint-fill jobs and touch-ups. You can switch from cold spray to hot spray foam. You can spray Polyurea and Polyurethane coatings, foam and can be used for caulking joints and spalls.
Reactor-E10hp

Reactor E-10 HP Coatings

If you'd like to add polyurea projects to your lineup, the Reactor E-10hp High Pressure Proportioner is a smart, affordable investment that can help your business grow.

The Reactor E-10hp provides the high pressure power and performance you need to spray polyurea coatings. It's lightweight and portable – and runs on residential power so you don’t need to invest in a generator.

Downloads:

E-10 Brochure | E-10 Manual

 

GRACO E-10 Material output chart

   This chart determines material output based on pressure and selected mix chamber.
   For example:
      • At 2200 psi with an AW2222 mix chamber, output is nearly 0.9 gpm
     • At 1800 psi with an AR2929 mix chamber, output is nearly 1 gpm

GRACO E-10 recirculation chart

   Use this chart to determine which Reactor E-10 model is best suited for your application needs.
   This chart determines recirculation times and tank temperatures necessary to achieve your
    final spraying temperature.
      • Curved portion of line represents tank temperature.
      • Straight vertical portion of line represents Delta T of primary heaters.
   To calculate necessary tank temps, subtract Delta T from your desired spray temperatures.

  

Comments are closed.