GatorHyde  
 
       
    
   


GSA Federal Supply Service
 
Federal Supply Service

The following products and equipment are now being offered through the GSA by Elastomer Specialties, Inc. Each product below has a Technical data sheet along with Application Pictures & Product Uses to further assist you in determining which of our products is best suited for your specific application. When you have completed reviewing our materials you can contact us directly at 1-918-485-2835 ext. 115 to order product or go directly to www.gsaadvantage.com and type in our contract number:
GS-21F-0044V
You may use either method to place an order with our company.


PRODUCT INFORMATION

SIN 834-100

ESI Coatings and Sealants
Product: Description:
   
ElastoFil 75 Non-Colorfast Joint/crack Sealant & Concrete Runway Repair Elastomer for both interior and exterior use. 1:1 ratio
1. Technical Data Sheet
2. MSDS - Side A
    MSDS - Side B
3. Application Pictures & Product Uses
4. Part # 1190A5GPP
   
KwikSeal 35

Non-Colorfast Joint/Crack Sealant and Concrete Runway Elastomer for both interior and exterior use. 1:2 ratio
1. Technical Data Sheet
2.  MSDS - Side A
     MSDS - Side B
3. Application Pictures & Product Uses
4. Part # 1208A5GPP

   
GatorHyde ARC-SG Pure Polyuea, high pressure spray coating system for interior/exterior use, non-colorfast, can be used on metal, wood, fiberglass and concrete surfaces. 1:1 ratio
1. Technical Data Sheet
2.  MSDS - Side A
     MSDS - Side B
3. Application Pictures & Product Uses
4. Part # 1290A5GPP
   
GatorHyde CG Polyurea Hybrid, high pressure spray coating system for interior/exterior use, non-colorfast, can be used on metal, wood, fiberglass and concrete surfaces. 1:1 ratio
1. Technical Data Sheet
2. MSDS - Side A
    MSDS - Side B
3. Application Pictures & Product Uses
4. Part # 2015A5GPP
   
GatorHyde CG-75 Polyurea Hybrid, high pressure spray coating system for interior/exterior use, non-colorfast, can be used on metal, wood, fiberglass and concrete surfaces. 1:1 ratio. This material is softer than the standard GatorHyde CG with a Shore A hardness of 75.
1. Technical Data Sheet
2.  MSDS - Side A
     MSDS - Side B
3. Application Pictures & Product Uses
4. Part # 2081A5GPPISO
   
GatorHyde DLX Polyurea Hybrid, high pressure spray coating system for interior/exterior use, non colorfast, can be used on metal, wood, fiberglass and concrete surfaces. 1:1 ratio. This material offers superior physical properties with a Shore A hardness of 92.
1. Technical Data Sheet
2.  MSDS - Side A
     MSDS - Side B
3. Application Pictures & Product Uses
4. Part # 1279A5GPP
   
GatorHyde DLX-65A Polyurea Hybrid, high pressure spray coating system for interior/exterior use, non colorfast, can be used on metal, wood, fiberglass and concrete surfaces. 1:1 ratio. This material offers excellent physical properties for a Shore A 65 elastomeric coating.
1. Technical Data Sheet
2.  MSDS - Side A
     MSDS - Side B
3. Application Pictures & Product Uses
4. Part # 2066A5GPP
    
GatorHyde UV-100 Polyurea Hybrid, high pressure spray coating system for interior/exterior use, colorfast, can be used on metal, wood, fiberglass and concrete surfaces. 1:1 ratio. This material offers excellent color stability, is 100% solids and is available in virtually any color. It has a rapid tack free time of 15 seconds.
1. Technical Data Sheet
2.  MSDS - Side A
     MSDS - Side B
3. Application Pictures & Product Uses
4. Part # 2066A5GPP
     
GatorHyde DLX-UV Polyurea Hybrid, high pressure spray coating system for interior/exterior use, color fast, can be used on metal, wood, fiberglass and concrete surfaces. 1:1 ratio. This material offers excellent color stability, is 100% solids and is available in virtually any color.
1. Technical Data Sheet
2.  MSDS - Side A
     MSDS - Side B
3. Application Pictures & Product Uses
4. Part # 2074A5GPPISO
    
GatorHyde EcoSpar PolyAspartic based thin film, No VOCs, Sol vented, coating that can be rolled or spray applied. Available in clear. 1:2 ratio material designed as a mar resistant top coat for polyurea spray coatings or epoxy floor systems. EcoSpar is 67% solids.
1. Technical Data Sheets
2.  MSDS - Side A
     MSDS - Side B
3. Application Pictures & Product Uses
4. Part # 2003A5GPP
    
GatorHyde PolySpar LP-1 100% solids PolyAspartic based spray coating that is colorfast and can be applied by either low or high pressure spray equipment. Available in colors. PolySpar LP-1 is tack free in 75 seconds and is designed to be applied in thin film applications. This material bonds extremely well to steel, wood, fiberglass, concrete, sheet rock and aluminum surfaces with the right primers.
1. Technical Data Sheet
2.  MSDS - Side A
     MSDS - Side B
3. Application Pictures & Product Uses
4. Part # 1288A5GPP
   
IsoPrime II Solvent based, inter-coat adhesion primer, (mix with 50% acetone). Developed for bonding polyurea spray coatings to one another. Dries quickly and can be applied by rolling or spraying.
1. Technical Data Sheet
2.  MSDS
3. Application Pictures & Product Uses
4. Part # 12911GMC
 
IsoSolv Single component, water soluble, dibasic ester based solvent containing no aromatic or petroleum distillates. A user friendly cleaner that is designed to remove uncured polyurethanes, epoxies, polyesters resins and polyureas from gun and plural component pumps.
1. Technical Data Sheet
2.  MSDS
3. Application Pictures & Product Uses
4. Part # 12995GPP
 
UltraFlush Plural component pump cleaner and line conditioner. UltraFlush is also designed to flushing out polyurethane foam and RIM equipment. This product is non-reactive with isocyanates.
1. Technical Data Sheet
2.  MSDS
2.  Application Pictures & Product Uses
3.  Part # 12931GPP
 
PoxyPrime 100% solids epoxy primer, no VOCs 1:2 ratio. This product is excellent for use on concrete, wood, steel surfaces. Primer can be applied at temperatures ranging from 20 F. to 170 F. Superior adhesion when used with polyurea spray systems.
1. Technical Data Sheet
2.  MSDS - Side A
     MSDS - Side B
3. Application Pictures & Product Uses
4. Part # 1201A1GMC
 
GatorHyde Wash Primer A two component, catalyzed, primer developed specifically for use on Aluminum and Galvanized Metals. Mix ratio 1:1 by volume. Allow 10-15 cure time before applying coating to surface.
1. Technical Data Sheet
2.  MSDS - Catalyst
     MSDS - Base
3. Application Pictures & Product Uses
4. Part # 2088A1GMC
 
AnvilDeck A quick curing, 58% solids, urethane/epoxy developed for use as a concrete primer or repair polymer. AnvilDeck can be applied directly to concrete or mixed with sand for rapid repair of spalled concrete and control joint intersections. Standard pot life is 4 minutes. AnvilDeck can be applied using plural component spray equipment or by rolling.
1. Technical Data Sheet
2.  MSDS - Side A
     MSDS - Side B
3. Application Pictures & Product Uses
4. Part # 1287A5GPP
 
Condor Pump Standard BT Series The Condor plural component pump is low-pressure and engineered for applying polyurea, urethane or some epoxy systems for the repair of damaged control joints or saw cut joints. It is also an excellent pump for use in new construction. Condor weighs 270 lbs. dry and comes complete, ready for use.
1. Equipment Specifications
2. Application Pictures
3. Part # 003-001-00001
Graco Pumps 1. Application Pictures & Product Uses
 
 
 
 
Should you wish to learn more about our products or would like to receive ordering information, please do not hesitate to contact us for additional assistance. We always welcome new applications and would be pleased to answer any questions you may have regarding our products.

Phone: 1-918-485-2835 Ext. 115 * Fax: 1-918-485-2856
E-Mail: nmoon@elastomer.com

   
      
 		    
GatorHyde